Trade (4mm) Knowle Wagon Works - 2mm Brass Bearing Tool

Lyndhurstman

Western Thunderer
Hello,

I searched for this over here, but couldn't find it.... This is from Tom Silsbury (TTTE) over on The Other Place

Knowle Wagon Works - Smaller Suppliers

I'm pleased to announce the availability of my brass bearing tool suitable for 4mm modellers, following approval from the moderators.

The tool allows easy and accurate fitment of any 2mm brass bearing in RTR stock. Due to its design it is suitable for OO, EM and P4 gauges.

The 8mm hex body allows ample clearance between the W-irons and the chassis.

It is supplied complete and ready to use with simple instructions.

I am currently working on a Website to allow online ordering, but in the meantime please PM me for details if you are interested in obtaining one.

I will update this thread once the Website is online.

They are priced at £12.00 plus £1.50 p&p (Royal Mail First Class).

Regards, Tom
Attached Thumbnails

  • post-23858-0-65733100-1463083148.jpg
  • post-23858-0-03769300-1463083164.jpg
I've long wanted one, but they never appear for me. I've purchased one, and it looks the part.

Cheers

Jan
 

Lyndhurstman

Western Thunderer
Thanks Jan just the thing, the thread mentions Gibson 2mm bushes is that the best source?
Cheers
Ade

*MINEFIELD ALERT* :)

Hi @AdeMoore

Gibson's are what I use, but its horses for courses, I think.Fundamentally, if you're using the drill method, you'll need the parallel sort, obviously. I know the Markits ones are generally too long for my (P4) needs (Bearing and axle interfaces for coaches and wagons) but others (00) like them. I must admit to using the 'melt in with soldering iron' method too... :D

Cheers

Jan
 

Bill Bedford

Western Thunderer
Thanks Jan just the thing, the thread mentions Gibson 2mm bushes is that the best source?

The Exactoscale bearings are the only ones that 'conform' to the Scalefour Society's original drawings. Conform is in quotes since in practice no manufacturer has been able to make the bearing cone to a consistent depth.
 

Bill Bedford

Western Thunderer
*MINEFIELD ALERT* :)

Gibson's are what I use, but its horses for courses, I think.Fundamentally, if you're using the drill method, you'll need the parallel sort, obviously.

I don't understand this.

Waisted bearings have a short parallel part to the body which fits nicely into a 2mm hole, and the pip at the end can be filed down if you have particularly shallow axleboxes.
 

Lyndhurstman

Western Thunderer
I don't understand this.

Waisted bearings have a short parallel part to the body which fits nicely into a 2mm hole, and the pip at the end can be filed down if you have particularly shallow axleboxes.

Hello Bill,

I'm highlighting (or attempting to highlight, but i notice i've neglected to differentiate in my haste to help..) that the parallel-sided bearing (i.e. the non-waisted variety) involves the use of the drill.

Cheers

Jan
 
Top