Recent Activity

Activity stream for all registered members at Western Thunder.

  1. Ressaldar replied to the thread Building the JLTRT Rebuilt Royal Scot.

    Hi Simon, Major Benjy (played to perfection by Denis Lill) one of the main characters of Mapp & Lucia just refers to it as Chota, he...

    6 August 2020 at 07:54
  2. Ressaldar replied to the thread Model Shops Remembered.

    Prior to being Cove Models, were they not Mallard Models with a shop on London Road, Camberley? Lynchford Road, Farnborough/North Camp...

    6 August 2020 at 07:42
  3. daifly replied to the thread Brushs Laser Cutting workbench.

    Thanks Phil. I need to do some maths. I'll get back to you in due course. I shall need 2.5 - 3 metres of it so there will be a few...

    6 August 2020 at 05:56
  4. daifly liked simond's post in the thread Building the JLTRT Rebuilt Royal Scot.

    Mike, I suspect that you don’t mean “chota”, as that means “small”. “Peg” is a measure. Slainte! Simon

    6 August 2020 at 04:45
  5. Dan Randall liked bogusman's post in the thread It's been awhile.

    Modelling has been a bit slow of late due to waiting for paint delivery and having been recalled back to work after four and a half...

    20200805_184357.jpg 6 August 2020 at 03:50
  6. Dan Randall liked daifly's post in the thread Brushs Laser Cutting workbench.

    7mm. If I was to sketch/give dimensions for the infilled arches, presumably you could produce the whole side of the viaduct?I don’t need...

    Type 3 6833 and 8414 on Viaduct.png Swansea 3.jpg 6 August 2020 at 03:48
  7. BrushType4 replied to the thread Brushs Laser Cutting workbench.

    Sure, no problem. up to 800mm wide sections. The material is only 800mm wide. I can put the brick arches in etc.

    5 August 2020 at 22:27
  8. daifly attached a file to the thread Brushs Laser Cutting workbench.

    7mm. If I was to sketch/give dimensions for the infilled arches, presumably you could produce the whole side of the viaduct?I don’t need...

    Type 3 6833 and 8414 on Viaduct.png Swansea 3.jpg 5 August 2020 at 22:21
  9. BrushType4 replied to the thread Brushs Laser Cutting workbench.

    I could engrave that for you. My work would be a bit flatter, but with good painting, it would look like your example. What scale are...

    5 August 2020 at 22:02
Loading...