R
Robinall
Guest
Gents
I am building a 5101 engine to scale 7 standards, using the Martin Finney kit as a starting point. Although "scale seven" spacers are provided they are approx 2mm too narrow and so I shall make my own.
As with the 28xx from the same stable, new spacers and subtantial running plate mods, new splasher tops etc. are required, so a GA drawing is essential.
Unfortunately, I do not have issue 5 of GWR Journal where such a drawing is published, and cannot obtain it from Wild Swan, the publisher. Are any of the members here able to help please?
Thankyou
Robin
I am building a 5101 engine to scale 7 standards, using the Martin Finney kit as a starting point. Although "scale seven" spacers are provided they are approx 2mm too narrow and so I shall make my own.
As with the 28xx from the same stable, new spacers and subtantial running plate mods, new splasher tops etc. are required, so a GA drawing is essential.
Unfortunately, I do not have issue 5 of GWR Journal where such a drawing is published, and cannot obtain it from Wild Swan, the publisher. Are any of the members here able to help please?
Thankyou
Robin