Overhead warning plates

[28ten]

I emailed the artwork on Wednesday and the first etch dropped through the letterbox today so a big for PPD.
The photos are a bit rubbish but the tripod is buried under boxes. The etching is very fine in 8thou but it has come out really well. The half etch holes for the fixing screws is just visible so there is the option of riveting it if required. each individual sheet will do 32 warning flashes. I have only done this one sheet and depending on numbers I will order more sheets.
I am just waiting to hear back about the transfers as they were delayed due to another job.

 

[lancer1027]

Hi Cynric , they look exellent count me in for a set. Does the set include the panels as i would also like some of those Have you any idea on cost yet ?

Rob :wave:

 

[Phill Dyson]

Yes I'm still interested too

 

[Ressaldar]

Hi Cynric,

please add me to the list.

regards

Mike

 

[28ten]

I havent tested the access panels yet, I have a feeling it may have been better to have used 4thou sheet to start with , but you are welcome to try one.
Cost will be no more than a fiver, probably closer to four quid, but I would like to make a small profit which would help towards the next little project :laugh:

 

[D1054]

I'm still in for these too, please Cynric.

Ian.

 

[Purple-haze]

Count me in as well please guv


regards


Rog

 

[28ten]

I will bring eight with me (I want a set for myself!!) and I will get a couple more sheets done, postage will just be a first or second class stamp. the transfers should follow shortly.

 

[Dan Randall]

Nice work Cynric. Put me down for a set too please.


Regards

Dan

 

[Dikitriki]

Hi Cynric

Can I have a set please.

Your should make a small profit too. Not too large mind, but enough to get stuck into the wagon underframes

Ta

Richard

 

[Phill Dyson]

Hi Cynric
Your should make a small profit too. Not too large mind, but enough to get stuck into the wagon underframes

& the milk tank ladders :laugh:

Phill :wave:

 

[28ten]

[quote=""Dikitriki"":34kvy0uh]Hi Cynric
Your should make a small profit too. Not too large mind, but enough to get stuck into the wagon underframes

& the milk tank ladders :laugh:

Phill :wave:[/quote:34kvy0uh]
Did we ever get anything on the milk tankers? there must be some drawings somewhere, I really want a set

 

[Phill Dyson]

[quote=""Phill Dyson"":37yavios][quote=""Dikitriki"":37yavios]Hi Cynric
Your should make a small profit too. Not too large mind, but enough to get stuck into the wagon underframes

& the milk tank ladders :laugh:

Phill :wave:[/quote:37yavios]
Did we ever get anything on the milk tankers? there must be some drawings somewhere, I really want a set [/quote:37yavios]
No , I think we would have to do em from photographs...........which doesn't bother a bodger like me too much :laugh:

 

[Temeraire]

If it's not too late I'd be very interested in a set of these OH warning plates too.

Unlikely to be able to get to Telford so would need to be the post option please.

Thanks
Anthony

 

[28ten]

No , I think we would have to do em from photographs...........which doesn't bother a bodger like me too much :laugh:

I really need some drawings or a site visit to get some measurements. BTW there is some background work being done on the Siphon, I have drawings and I found a resin caster who is local to me.

 

[28ten]

If it's not too late I'd be very interested in a set of these OH warning plates too.

Unlikely to be able to get to Telford so would need to be the post option please.

Thanks
Anthony

Yes no problem. As I said I will be doing a few more sheets as the first was just a test.

 

[lancer1027]

Hi Cynric, nice to have finally put face to name on sunday . But i forgot to ask you about the overhead warning plates . Are they ready to be purchased and how much did you want . I also wanted some of the access panels.

Rob :wave:

 

[28ten]

Hi Cynric, nice to have finally put face to name on sunday . But i forgot to ask you about the overhead warning plates . Are they ready to be purchased and how much did you want . I also wanted some of the access panels.

Rob :wave:

I had them with me, but I must have been too busy nattering! ?4 for the plates and you can try the access panels for nowt as I haven't tried them myself, hopefully the transfers will be done in the next week or so.
Anybody else who wants some and didn't get them give me a shout

 

[D1054]

Hi Cynric,

Sadly, I couldn't stay for both days so missed you on Sunday. I'm still wanting plates and transfers, and would also be interested in the cover plates for Westerns is you have any left? I'm really looking to re-do all my locos with thes plates/transfers, so will need quite a few..... no problem if it'll need to be the next batch though....

Locos up for the change are:-

08, 20 x 2, 25, 37, 40, 50, 52 x 4

That's quite a few! Will keep you in business :lol:

Ian.

 

[28ten]

Ian, PM your address and I will get some off to you