Bit late in the build but we'll start from where I am now with the build and possible do a prequel later on. This is being built from an old Oakville kit which is showing its age. Will be 45721 in BR green with welded tender. State of play now is the tender is complete ready for a good clean and priming. The loco is coming on but slowly. The kit had white metal cast brakes. So these needed altering to brass along with the motion bracket and associated mounting for the expansion link. As you can see the frames are almost done. With the wheels on the everything goes around as it should including connecting rods and crossheads. Rest of the valve gear is fettled but not fitted. Footplate, cab, firebox and boiler all fit together. Boiler yet to be fixed, probably by screws. Smoke box saddle is too long and needs shortening. The main problems here were the firebox which when I made with the kit parts I could not get to fit, and the cab was to wide. More soon I hope. I'm hoping that this week I can get some painting done and catch up a bit. There's my 0395 to finish and a MR1262 as well. And the lads Thomas has not even seen primer as yet.