1/32 Slaters Midland Railway 10T Van Build

Discussion in 'G1/32' started by Keith Phillips, 25 January 2019.

  1. Mike W

    Mike W Western Thunderer

    To pick up on Spitfire's post, I believe the 7mm and Gauge 1 kits are injection moulded plastic made by Slaters in-house, whereas the Gauge 3 version is an outsourced resin casting made from an outsourced hand-made brass pattern. Keith shouldn't have a problem with release agent.

    I am well through the Gauge 3 version and I too am struggling in places but it will be very nice when done. Your posts have been helpful, thanks Keith.

    Mike
     
    Keith Phillips likes this.
  2. Keith Phillips

    Keith Phillips Western Thunderer

    Finally found some time to do a bit of painting on the van.

    I have used Vallejo acrylic paints from my airbrush. I used the grey and the black primer for the first bit. I decided to have a go at 'pre-shading' at the priming stage. I have never done this before but the idea is that the primer coats will show through the thin top coats to give depth and interest to the finish. So rather than shading and weathering over the top coat it should show through from underneath.

    P1060877.JPG

    Here is the van in all its pre-shaded glory.

    P1060882.JPG

    P1060883.JPG

    Here is the finished top coat. I made up the bauxite colour from Vallejo Model Colour Cavalry Brown (70.982) and Orange Brown (70.981) mixed 1:1. I had to thin the paint with Vallejo Airbrush Thinners to enable it to be sprayed (1:1:1) as the Model Colour paints are designed to be brushed on and are much thicker than the Model Air colours.

    I'm fairly pleased with how it worked out. I could have gone a little heavier with the black in places but the varying tones are quite pleasing. This is the first thing I have airbrushed (another new skill being learned) and I am sure that I will improve but it shows what a complete novice can achieve. I still have the pin wash to apply to pick out the planking and raised details and some washes around the more worn surfaces after I have found and applied the transfers. Where did I put them safely away so that they do not get lost????

    The roof of the van shows my aborted attempt at using tissue to create texture to the surface. I found that the tissue puckered and made too many creases to be believed. fellow WT'ers will put me straight on method (thank you Mr. P.I for your input already:thumbs:).

    Cheers,

    Keith
     
    Brian Wainwright, Neil, AJC and 7 others like this.
  3. Michael Osborne

    Michael Osborne Western Thunderer

    image.jpeg Keith,
    When I did the roof on my LNWR brake van I used a single sheet of a very plain tissue. I placed the tissue on the plastic roof and brushed on Limonene with a wide flat brush and smoothed it out from the centre with my finger. I then left it to dry overnight before tucking it underneath and doing the same.
    I did put this method on the GOG forum once but one member wrote that the texture would not be seen as the roof would be covered in tar/paint.
     
  4. Keith Phillips

    Keith Phillips Western Thunderer

    That looks good to me :thumbs:. Thanks for the info Michael.
     
  5. LarryG

    LarryG Western Thunderer

    When David Jenkinson was at ours discussing his then new hobby of building 0 gauge coaches from Plastikard, I suggested as a joke that he glue writing paper to his wooden roofs to save me spending so much time trying to fill the woodgrain. He took it up and it provided a finish something like canvass.
     
    Last edited: 13 August 2019
    BrushType4 and Keith Phillips like this.
  6. BrushType4

    BrushType4 Western Thunderer

    Beautiful work. I fear that one day 10mm will be my downfall. If a class 47 kit was ever to be made..,
     
  7. Keith Phillips

    Keith Phillips Western Thunderer

    I believe one is being worked on.......... 10mm or 1/32 I do not know. Thank you for your kind words.
     
    BrushType4 likes this.
  8. Mike W

    Mike W Western Thunderer

    Having recovered a real carriage roof with white lead and canvas, you can see the texture. I guess with repeated coats of paint it will fill in eventually but it would never be smooth like a coach or wagon side. Yours looks spot on to me Mike.

    Mike
     
  9. BrushType4

    BrushType4 Western Thunderer

    That looks great to me and I'll be tying the same.
     
  10. Yorkshire Dave

    Yorkshire Dave Western Thunderer

    Looks good.

    I also add a few drops of Vallejo Airbrush Flow Improver when using their Model Colour range with an airbrush. This acts as a slight retardant.
     
    Keith Phillips likes this.