Spitfire's G3 Workbench

Discussion in 'G3' started by Spitfire2865, 8 December 2017.

  1. Spitfire2865

    Spitfire2865 Western Thunderer

    Thanks
    So I start with a grey primer and then an even coat of a light tan. Then start drybrushing every woody colour you have. A bit of silver drybrushed every so often in certain areas. You should end up with a varied colour across every plank.
    Then start picking out certain planks with slightly heavier or lighter drybrushing.
    Overall a heavy wash of black wiped across the planks to sit in the gaps.
    Then another black wash lightly wiped along the planks once the previous is dry. I think I ended up doing 3 or 4 washes by the end.
    Then brush with dark powders to take the sheen off. Ive done powders on both wet and dry surfaces before, so you can try a bit of both and see how that ends up.
    If you wanted a replacement plank, youd then have to repaint those the lighter colour with a lighter drybrushing.

    Its a long process but Ive used similar in both 4mm and G3.
     
    Dog Star, DavidinAus and Ian_T like this.
  2. DavidinAus

    DavidinAus Western Thunderer

    It does sound a lot of work, but easily worth it. Thanks.
    Fortunately the HiChem All-Surface Primer is grey and very thin, to start with.
    I will give it a try.

    David
     
  3. Spitfire2865

    Spitfire2865 Western Thunderer

    While I regain my strength to retackle the Midland open, Ive begun on a 16Mills kit.
    Specifically the LBSC 4t ballast.
    20190403_213326.jpg
    Chassis put together and a side being worked on. Im going to use rivets with fake nuts to represent carriage bolts.
    Just have to source fake nuts now....anyone got a source?

    Ive also got a couple side tippers and WC minerals from Dave to build as well but those will have to wait for more wheels.
    Just from what Ive done so far, these kits are excellent with plenty of easy detailing to be done.
     
    Peter Cross, Arty, Dog Star and 2 others like this.
  4. Spitfire2865

    Spitfire2865 Western Thunderer

    Well, progress.
    20190406_223411.jpg
    I must say, Im really impressed by the lasercut card strapping. Soaked in CA, it makes a very nice material that sands easily and holds its form well. Corners round off really nicely too. Sand enough and the seams just disappear.
    20190406_223548.jpg
    Coach bolts represented by rivets with drilled out 14ba nuts soldered on.
    Ive also had my first try of the CA and baking powder filler technique. Very effective for filling some unneeded lines around the buffers.

    Once the strapping is finished, Ill get onto priming and painting my usual wood effect.
     
    AJC, Dog Star, Ian_T and 4 others like this.
  5. Jon Nazareth

    Jon Nazareth Western Thunderer

    Trevor
    What is a 'WC mineral' and 'CA'?

    Jon
     
  6. Spitfire2865

    Spitfire2865 Western Thunderer

    West Cornwall mineral wagon (as offered by David Mills of SixteenMills) and cyanoacrylate (I used the thin stuff to stiffen up the card)
    Ive got two of the former to build as well as his side tippers to make a bit of a freelance contractors train behind my neilson.
     
  7. Spitfire2865

    Spitfire2865 Western Thunderer

    Well Ive got a couple side tippers mostly assembled.
    20190409_210434-1.jpg
    I have quite a few NBW castings coming in the mail soon so plenty of detailing to add to all 5 wagons.
     
    Arty, Dog Star, Ian_T and 2 others like this.
  8. Spitfire2865

    Spitfire2865 Western Thunderer

    Well I had a 'fun' afternoon.
    I had a slight disagreement with a pothole while driving home. This resulted in a voilent blowout of the front and a flat on the rear. 20190410_172144.jpg
    The rest of the afternoon and evening sitting by the roadside, in a tow truck, and in an autoshop has seen me with 4 new tires, an oil change, and significantly lightened pockets.
    Im ready for bed....
     
  9. oldravendale

    oldravendale Western Thunderer

    Did you manage to get a photo of the pothole, and precise location?

    I believe that local councils are liable but require evidence. I had the same issue on one of the Buckinghamshire country roads and the District Council advised that tis was necessary to accompany a claim. When I went back the pothole had, of course, been filled. The Council has some wriggle room, though. I believe that the hole has to be unreported, or if previously reported marked up and dealt with within a certain time - three days i think. Those conditions may not, of course, be standard across the country.

    In any event that's really bad news, Trevor, and I empathise.

    Brian
     
  10. Spitfire2865

    Spitfire2865 Western Thunderer

    Well I expect my local government here in the US to prove even more useless.
     
  11. Spitfire2865

    Spitfire2865 Western Thunderer

    Eating 3 (well really 9 but who's counting?) elephants at the same time. But some progress on each.
    20190414_193439-1.jpg
    The two side tippers are mostly assembled and working on details. Strapping done on one, nut castings done on both. Plus the chassis have had some black sloshed on em. Black seemed a fairly reasonable colour for something like this. Dumb buffers added to the headstocks and Ive filled the bufferstock mounting holes with Apoxie sculpt. A beautiful material for those uninitiated. 2 part epoxy putty that can be worked so easily both wet and dry. Even is machinable and can be tapped!

    20190414_193743-1.jpg
    The sole ballast wagon finally got a coat of primer today before my typical wood treatment. However I have just realized I forgot to add the nameplate. Suppose it wont be much issue adding it later.

    And a start on the WC mineral wagons.
    One I think Ill build normally.
    The other to be modified with a 'high' curved end. 20190414_193628-1.jpg
    Thought itd make an interesting variation, regardless of its usefulness on such a low sided wagon.
    You can also see the modifications needed to fit the coupling hooks I have.
     
    Jon Nazareth, Arty, JimG and 3 others like this.
  12. Arty

    Arty Western Thunderer

    Excellent work Trevor, one of the reasons I like David’s kits is that they can be modified so easily.
     
    Spitfire2865 likes this.