1/32 Wheel slip

Discussion in 'G1/32' started by Bindondepotman, 8 November 2019 at 07:03.

Tags:
  1. Hello been building two RC battery powered Wainwright c class locos but I’ve have to split the cranks to allow the loco to go round the curves I have.
    The issue is that despite adding weight to the locos I am getting wheel slippage on the powered axle causing the split cranks to bind. Doesn’t happen every time about 3 out of ten times it pulls away.
    Anyone got any ideas on how to cure this?
     

    Attached Files: