Who's going to the 'BOGG'?

Scale7JB

Western Thunderer
Anybody visiting Bristol show?

Looking forward to it as have only heard good things!

Remember there's a Scale7 test track.... Might this be the first time Scale7 has been actively shown in a public forum/large exhibition?

JB.
 

tomstaf

Western Thunderer
I'll be there on the DEMU stand. I'll have the completed Appleby IGA Cargowaggon with me, and I'll be giving it an outing behind a 33 on the test track at some point. Look forward to meeting some of you.

Cheers

Tom
 

Dan Randall

Western Thunderer
I'll definitely be there. Pete (aka bogusman), is hoping to drive down to mine from Windsor and blag a lift to Bristol with me. :thumbs:


Regards

Dan
 

mickoo

Western Thunderer
It'd be nice but the distance is a bit far for a trade show. especially so close after Reading, train takes between 4.30 and 4.50 each way so that's a long old trek and driving requires circumnavigation of the dreaded M25 but time is shorter at a calculated 3.45 but probably more costly in fuel. Its also the day after Ally Pally :(
 

Pugsley

Western Thunderer
Remember there's a Scale7 test track.... Might this be the first time Scale7 has been actively shown in a public forum/large exhibition?
In terms of a test track, I think it might be - I can't think of anywhere else that has featured an S7 test track before. Of course, S7 layouts have featured at Telford before.

I'm not sure if the 37 will be making an appearance yet, but I'm definitely going.
 
S

SteveO

Guest
I'm hoping to go. I still have £120 I was planning to spend at Reading and will top that up a bit for another wagonfest. I can't see ABS listed - I was hoping to add a few opens to the couple I already have.
 

Ressaldar

Western Thunderer
just had the 'heads up' from Shawn Kay - Easybuilt that he will have his latest kit on show - as work in progress - the 1963 Swindon built Inspection Saloon DB 999506/8 & 9. DB999508 is still with us as the Track Inspection Coach with the inset sides, Shawn is doing the 'as built' version, possibly with the later Calor Gas heater vents as an option.

I shall have to be patient and wait to see it at Kettering, who knows, it may be ready by then:thumbs: Unless of course, he is attending Bolton in a few weeks time - I'll definitely be there.:thumbs::thumbs::thumbs:

Have a good day those that are attending.

Mike
 
Top