Brushs Laser Cutting and 3d Printing workbench

[adrian]

Whatever the reasons it can't have been an easy decision to make so I hope you can take all the positives from the legacy you've created. It's certainly paved the way for what is possible with laser cutting and encouraged many to have a go.

Wishing you and your family all the best for the future.

 

[fenman]

Unfortunately it’s with great regret I’ve had to shut Intentio down. All outstanding orders will be supplied or refunded if you get in contact.

I’ll continue with project work.

Sorry to hear that Phil, all the best for the future.
Peter.

 

[JimG]

Unfortunately it’s with great regret I’ve had to shut Intentio down. All outstanding orders will be supplied or refunded if you get in contact.

I’ll continue with project work.

That is bad news. I trust that you will keep us informed of your project work. I always keep a lookout at what you are doing just to see what is possible with a laser cutter.

Jim.

 

[Richard Thomas]

It was your work which inspired and started me on my 0 gauge journey. It's going to be a while before others get even close to the standards that you have achieved.
Best wishes for the future
Richard T

 

[BrushType4]

Well the trusty HPC has moved to a fresh home and fellow thunderer and I hope to see the work it will produce pop up on WT in the future

It was with a sad heart to see it go but onwards and upwards. So the new laser finally installed. A little earlier than I’d planned but the garage cum workshop will have to be drylined around it.


With my mojo slowly coming back and patience wearing thin for some of my customers it was time to put the new machine to work with an outstanding commission.


This will be built and painted by Martyn Welch. I’ll be looking forward to seeing those build pictures.

 

[BrushType4]

One of my projects needed fencing and I couldn’t find what I wanted and I should make my own anyway. So with a little thought on how I can make long stretches of fencing easily and accurately I’ve come up with a plan that incorporates a disposable jig.

 

[Eastsidepilot]

Well the trusty HPC has moved to a fresh home and fellow thunder and I hope to see the work it will produce pop up on WT in the futureView attachment 99320

It was with a sad heart to see it go...............

Yes, I and a few others helped to push it into it's new home, we thought it was an indoor barbecue

Col.

 

[Dan Randall]

Hi Phil

I'm guessing the new laser cutter has a larger cutting capacity than the old one? What's the maximum size you can accommodate please?


Regards

Dan

 

[adrian]

I'm guessing the new laser cutter has a larger cutting capacity than the old one? What's the maximum size you can accommodate please?

As my wife would say there's an FBC on the front

Spoiler: TLA alert FBC

F***ing big clue - it's a Forensic Scientist TLA.

Speedy400flexx - 1000x610mm
Speedy Laser Engraving Machines

 

[Peter Insole]

Something was toasting nicely on it yesterday Col!

Here is a pic of the team taking it the long, and only way round:



In retrospect, it might have been an idea to use a bier of some sort...?

Perhaps a brandy or two would have been preferred at the time though?!!!

Pete.

 

[Dan Randall]

As my wife would say there's an FBC on the front

Spoiler: TLA alert FBC

F***ing big clue - it's a Forensic Scientist TLA.

Speedy400flexx - 1000x610mm
Speedy Laser Engraving Machines

Doh! Thanks Adrian.


Regards

Dan

 

[Pencarrow]

One of my projects needed fencing and I couldn’t find what I wanted and I should make my own anyway. So with a little thought on how I can make long stretches of fencing easily and accurately I’ve come up with a plan that incorporates a disposable jig.

View attachment 99336 View attachment 99337 View attachment 99338 View attachment 99339 View attachment 99340 View attachment 99341 View attachment 99342 View attachment 99343 View attachment 99344 View attachment 99345 View attachment 99346 View attachment 99347 View attachment 99348

Very neat way of incorporating the jig into the fret. Are you making this available commercially?

 

[BrushType4]

Very neat way of incorporating the job into the fret. Are you making this available commercially?

Yes. Packs of 6 for £7.50. That’s about 60 scale feet.

 

[Pencarrow]

Yes. Packs of 6 for £7.50. That’s about 60 scale feet.

Cheers (obviously I meant jig not job - blinking auto-correct)

 

[Peter Cross]

Think I need about 2 metres worth of the LSWR fencing, will there be gates etc?

 

[BrushType4]

I can do gates. Have you got a picture and I’ll match up. I’ll have look to see if I have drawings for gates. Not sure I have other than generic types.

 

[Barnaby]

Sorry to read that you had lost your mojo Phil but I hope the new Laser means you will be having another go.

Wishing you every success.

Best

 

[Oz7mm]

Really neat job with the fencing Phil

John

 

[BrushType4]

Really neat job with the fencing Phil

John

Thanks John. It just makes it easier to build up than the jigs I’ve seen others use.

 

[Keith Phillips]

That is really good. A very neat solution.