4mm South East Wales EM Gauge Group

paratom

Western Thunderer
This group has been created to include the possible activities listed below :
· Discussions/talks on modelling methods and skills
· Talks on historical and prototypical subjects
· Visits to member’s homes for running sessions on layouts
· Assisting other members who may be new to EM or P4 standards and conversions
· Running an EMGS Society stand at local exhibitions to promote the society
· Visits to some other exhibitions or heritage railways on a car share basis
 
Last edited:

john.chivers

New Member
This group has been created to include the possible activities listed below :
· Discussions/talks on modelling methods and skills
· Talks on historical and prototypical subjects
· Visits to member’s homes for running sessions on layouts
· Assisting other members who may be new to EM or P4 standards and conversions
· Running an EMGS Society stand at local exhibitions to promote the society
· Visits to some other exhibitions or heritage railways on a car share basis

Good morning, have sorted out an account etc.
I look forward to seeing what we’re all up to at the moment

John
 

GwynC

New Member
I am in!
Thanks to Paratom for setting up this group

I'm also part of the Elmore construction group, and I was the one who brought the EMGS AGM to Nantgarw last November!!
 

Ynysybwl

Member
Welcome John, if we can have the banter between us that we already have with Sandy we will be on a winner here with pictures of some good modelling.
 

john.chivers

New Member
On my workbench at the moment.
A BR(WR) inspection saloon, it’s an old preservance kit which was sort of started

I had to completely take it back to kit form and start again on this one. Sadly it was put together inside out so all of the detail was on the inside. It was also assembled with electrical solder so that took some heat to clean up. Gladly it’s gone together pretty well and there weren’t too many bits missing.

It’s just had a layer of etch primer and a Matt black on the chassis. Now to paint the GWR chocolate and cream (unusual as it was only ever a BR coach, Swindon pride I guess!)

B3879798-6B6D-49D3-AA51-831FC2891DC2.jpeg BCB96160-49FF-4934-B1A9-0A7047957EA2.jpeg 7A129809-52F9-4730-81C2-8F2946BDD306.jpeg BC779F69-91D8-4FEF-BB48-456EDD2C4F63.jpeg

How it arrived
D4AEDEAC-A95D-4EE0-88EE-99BC1D395DCF.jpeg 8C586447-F83C-4E7D-BAC3-E1DD98836A98.jpeg
 

Ressaldar

Western Thunderer
On my workbench at the moment.
A BR(WR) inspection saloon, it’s an old preservance kit which was sort of started

It’s just had a layer of etch primer and a Matt black on the chassis. Now to paint the GWR chocolate and cream (unusual as it was only ever a BR coach, Swindon pride I guess!)

Hi John,

you could always remove the gong and do it like this

P1000899.JPG

from a 7mm Orion kit

regards

Mike
 

paratom

Western Thunderer
On my workbench at the moment.
A BR(WR) inspection saloon, it’s an old preservance kit which was sort of started

I had to completely take it back to kit form and start again on this one. Sadly it was put together inside out so all of the detail was on the inside. It was also assembled with electrical solder so that took some heat to clean up. Gladly it’s gone together pretty well and there weren’t too many bits missing.

It’s just had a layer of etch primer and a Matt black on the chassis. Now to paint the GWR chocolate and cream (unusual as it was only ever a BR coach, Swindon pride I guess!)

View attachment 121154 View attachment 121155 View attachment 121156 View attachment 121157

How it arrived
View attachment 121159 View attachment 121158
Nice work John.
 

John_Miles

New Member
My latest work has been track painting and ballasting - not very photogenic - but around 6 weeks ago I did get two Midland Railway 2Fs back from Warren Hayward who has done the painting and lining for me. They are Gibson kits but with Ultrascale wheels (I don't like Gibson wheels) and unusually, I have used most of the kit. I did make a new boiler for one and both the smokebox wrappers and chimneys are my own work. The locos need finishing with things like buffers, handrails, vacuum ejector etc. Photo of one attached. I did try for a photo of both but cameras and me don't get on very well.2f-closeup.jpg
 

paratom

Western Thunderer
I’m sure the lockdown has been very conducive for some modellers myself included so here are some things I have been working on. Back to working on our club layout goods shed using the combined technology of 3D printing and laser cutting for the canopy. A 2mm 3d printed Vangaurd loco for Paul Gandy and 3D artwork for a 7mm water tank to be printed on my new 3D printer.
 

Attachments

  • IMG_3373.JPG
    IMG_3373.JPG
    54.3 KB · Views: 57
  • IMG_3375.JPG
    IMG_3375.JPG
    63.7 KB · Views: 57
  • GWR Water Tank.JPG
    GWR Water Tank.JPG
    48.7 KB · Views: 59
Last edited:

john.chivers

New Member
I hope you are all well

Over the last few weeks I’ve been working on 3 brass kit GWR brake vans.

The left hand is an AA3 road van (frogmore kit) which will be based in the yard on our new layout, it’s RU for doing trips down our branchline

The middle is an AA6 Pway brake (another frogmore kit)

The right hand is an AA10 ballast plough brake (a modified Jidenco kit) this and the AA6 will top and tail the ballast hoppers to make quite an interesting train

John

6984297C-B33C-4A03-9C64-9497B85127C5.jpeg DCEF0BE6-BC56-49A6-BE46-68F6CA40A0C9.jpeg
 
Top