Rob Pulham
Western Thunderer
These are destined for the small ads so now I need to decide on how I intend to finish them. Personally I would like to do one LSWR version (so I can add the extra details that were removed later in it's life) and a BR version. But I suspect that in terms of being attractive to a wider range of buyers the BR version will have most appeal.
Besides using them to generate funds I am also using these to ensure that I can still solder etc and work okay in metal before returning to building things for other people. My fingers are mostly back to normal after my mishap with the mower but there are some jobs such as driling with a pin vice that I am finding difficult at the minute. Hopefully that will improve with time and use.
![49991304986_ac13a6ce74_b.jpg](https://live.staticflickr.com/65535/49991304986_ac13a6ce74_b.jpg)
![49991548972_a7d69c7347_b.jpg](https://live.staticflickr.com/65535/49991548972_a7d69c7347_b.jpg)
![49990782813_670215b249_b.jpg](https://live.staticflickr.com/65535/49990782813_670215b249_b.jpg)
They are much more involved than I originally envisaged with a good number of overlaid parts. What you see above is the result of more than 8 hours work. Admittedly that is for two of them.
For anyone building these a tip is to take some time over the bending of the ducket fronts. Getting the basic shape was fairly simple. But taking extra time to get them to fit without having to apply any pressure paid dividends when it came to soldering them on.