7mm Finney7 5972 Olton Hall ( aka )

P A D

Western Thunderer
Hi Mick,
Very nice indeed. I used those mud hole covers from Malcolm Mitchell somd time ago (I think on my Scorpio large prairie), but then forgot about them until somebody mentioned them on here. I used them on the 3P but even fixing with epoxy as suggested I got one in the wrong position. I was prepared to trash it getting it off to replace with another, but just putting a sharp blade under the rear edge and applying a little force caused ig to ping off with no damage. It left a perfectly resin cast mud hole in place that was then scraped off. I don't know if that would work every time, but sometimes you get lucky.

Cheers,
Peter
 

7mmMick

Western Thunderer
Cheers Peter,

The instructions that come with them suggest epoxy for securing but I soldered mine as I knew fine adjustment maybe needed and I’m just not confident enough to get the positioning absolutely bang on. Especially with the small strip to represent the hinge.

@SimonT Sounds interesting, why not :thumbs::D

Mick
 
Top