7mm Gladiator Models Hand Crane

Ian G

Western Thunderer
After loosing a part on my crocodile, I found a suitable width of brass on my hand crane kit I bought at reading a few months ago, both wagons are built and primed, crane body part built and jib rounded at the ends.
The buffers where cast and had to be drilled out, so they have been replaced with Parkside Dundas southern brake van buffers.
I need to find a suitable jib runner, and looking for a suitable southern wagon or 4/6 wheel coach chassis for it, something longer than a 10 foot wheel base.

Ian G
 

Attachments

  • Hand Crane 1.jpg
    Hand Crane 1.jpg
    160.1 KB · Views: 91
  • Hand Crane 2.jpg
    Hand Crane 2.jpg
    160.8 KB · Views: 92

Ian G

Western Thunderer
All the main parts in primer, the jib has been masked as this will be stained dark oak along with the planking, overall finish will be weathered black.

Ian G
 

Attachments

  • Hand Crane 3.jpg
    Hand Crane 3.jpg
    123.1 KB · Views: 68
  • Hand Crane 4.jpg
    Hand Crane 4.jpg
    128 KB · Views: 67

Ian G

Western Thunderer
I managed to spray the black this weekend due to the far to hot weather.

Ian G
 

Attachments

  • Hand Crane 6.jpg
    Hand Crane 6.jpg
    137.3 KB · Views: 58

Ian G

Western Thunderer
The story so far, crane is built now needs a spot of weathering to finish.

Ian G
 

Attachments

  • Hand Crane 7.jpg
    Hand Crane 7.jpg
    165.8 KB · Views: 40

Ian G

Western Thunderer
Match truck built, now im thinking of a box to fit on the end for carrying of lifting gear.

Ian G
 

Attachments

  • Hand Crane 8.jpg
    Hand Crane 8.jpg
    169.8 KB · Views: 22
  • Hand Crane 9.jpg
    Hand Crane 9.jpg
    183.7 KB · Views: 19
Top