7mm Loose Ends

Discussion in 'WR Action' started by 28ten, 23 January 2010.

  1. 28ten

    28ten Guv'nor

    That's pretty much it. I suspect it might be cleaning marks rather than paint, quite hard to scale without looking odd.
    Terrysvr likes this.
  2. alcazar

    alcazar Guest

    The one I saw was earlier, with a red T-shaped bit on the buffer-beam.
  3. 28ten

    28ten Guv'nor

    A few signal levers stuck in this afternoon, they are actually correct for Lambourn post '38


    I need to add a couple of shelves in the far corner, the token instrument and some little bits of clutter

  4. 28ten

    28ten Guv'nor

    A little bit of doing today saw the valance cut. obviously all the slots etc get covered with overlays:)

    Brian Wainwright and BrushType4 like this.
  5. 28ten

    28ten Guv'nor

    The rather individual valancing. Im sure I have about 3 miles of valancing to do for Heyside and this 1mm mdf works really well
    Peter Cross, Daz50 and Compton castle like this.