7mm Manning Wardle L Class Contractors Loco

makhis

Western Thunderer
Just finishing off my Manning Wardle L class 0-6-0ST (1923). The body is only resting on the chassis as I shall be adding some additional weight to it. The Driver is obviously expecting trouble as he is holding a large spanner presumably to give some part a good whack. The actual loco was named Winston Churchill rather than my choice of name Albion.
L1.2.jpg L1.1.jpg
Mike
 

makhis

Western Thunderer
Hi Rob, the oil can is a brass casting,but the spanner is a couple of small washers soldered to a piece of nickle silver and filed to shape.
cheers
Mike
 

Rob Pulham

Western Thunderer
Hi Rob, the oil can is a brass casting,but the spanner is a couple of small washers soldered to a piece of nickle silver and filed to shape.
cheers
Mike
I must be blind - I hadn't noticed the spanner:oops: - I will remember that one. Can I ask whose brass casting the oil can was, I made one before but it was a bit fiddly and I would like another for the next loco?
 

makhis

Western Thunderer
Hi Rob, the oil can is from Laurie Griffin/Shedmaster Loco Tools G1006L.
regards
Mike
 
Top