Latest activity
-
Well done! My own garden room is 10.5 m2, but then again the entire garden is 50 m2. I bought mine as a home office before I retired... -
June running session with Ben, Trev, Paul, Alisdair, Graham and Geoff on a rather warm day. We ran the timetable from midnight to 9:30...
-
A day spent on the drawing board and on the laser..... The front crane beam with the jib clevis the crane footplate precut for...
-
In other news I finally found some time to do some HO trainset work. A few weeks back I bagged these from a well known auction site, up...
-
Finally got around to taking some quick photos of the B16 . The lining looks a bit bright due to the flash and also it's not adhered...
-
We all had a great day yesterday, quite a few visitors and Richard and Linda joined us for the day, which was really lovely. Richards... -
JimG reacted to Yorkshire Dave's post in the thread Yorky D's Küchentisch: Waving the flag(s) with
Like.
Some bus stops created from my own decals. The LT ones are the Peco/Merit mouldings and the provincial ones were made up from 1mm brass... -
At the time I was looking at track, I was also playing with DCC-Ex. This system allows VERY cost effective turnout control via an I2C...
-
After weeks of painting bricks, fitting tiles and repeated attempts of 3d printing fall pipes and gutters. I have finally refitted the...
-
-
June running session with Ben, Trev, Paul, Alisdair, Graham and Geoff on a rather warm day. We ran the timetable from midnight to 9:30... -
A day spent on the drawing board and on the laser..... The front crane beam with the jib clevis the crane footplate precut for...
-
June running session with Ben, Trev, Paul, Alisdair, Graham and Geoff on a rather warm day. We ran the timetable from midnight to 9:30...
-
Thank you, gentlemen. Will apprise you presently. Best, Jon -
June running session with Ben, Trev, Paul, Alisdair, Graham and Geoff on a rather warm day. We ran the timetable from midnight to 9:30...