kenjazz
Active Member
Well you were asking for loads of photos etc. So here you join me building the JLTRT Hall class. The tender is already completed as I join the WT forum. It went together quite well with good instructions and exploded diagram drawings. There was no consideration or etching for the draw bar arrangement to couple to the loco. So I added a 6BA bolt to the chassis and fitted a DA spare draw bar. I will add a vertical pin with a suitable gap when the loco is built.
I have now started on the loco chassis. This is a bit of a problem as no written instructions for guidance of the many etchings and castings provided in the kit. Also the exploded drawings are quite sketchy too. So experience is coming into play on this build plus the use of some of my photos.
The chassis so far.
I have now started on the loco chassis. This is a bit of a problem as no written instructions for guidance of the many etchings and castings provided in the kit. Also the exploded drawings are quite sketchy too. So experience is coming into play on this build plus the use of some of my photos.
The chassis so far.