LarryG
Western Thunderer
This LAZERCUT RAILWAY MODELS "Medium station" is made of wood and not card, so it's pretty substantial. Instructions are in the form of images, but I decided to build it a different way to ease painting.
All the doors and window frames were stuck down to peices of timber ready for spray-priming...
First and most importantly, mark the top of the base. If its upside down, the ends will not key into the slots...
The two interior partitions were glued to the base with UHU. The two sides of the building were also glued to the base with UHU but were attached to the partitions with Evostick Impact to ensure everything is held together while the UHU sets....
Next, the two ends were attached with UHU and weighted.....
All the doors and window frames were stuck down to peices of timber ready for spray-priming...
First and most importantly, mark the top of the base. If its upside down, the ends will not key into the slots...
The two interior partitions were glued to the base with UHU. The two sides of the building were also glued to the base with UHU but were attached to the partitions with Evostick Impact to ensure everything is held together while the UHU sets....
Next, the two ends were attached with UHU and weighted.....
Last edited: