midland railway

Hi all, for a while I have posted on RMWeb but thought it remiss of me not to be on here too. I’m at Railex at Stoke Mandeville over the weekend with Midland in Tewkesbury and was chatting to a friend today who was extolling the virtues of WT. As I haven’t posted here for a while, I thought I’d...

Doing some test prints for scratch built EM gauge track. Here is a 3D printed Midland Railway check rail chair with a 1mm gap for EM gauge I have produced. I plan to create a whole range of Midland Railway chairs that aren’t commercially available for point work.

If anybody has some detailed drawings of special MR or GWR point or crossing chairs that they could send to me as a pdf or other format I will reward them with 3D printed chairs in 4mm or 7mm to make a point or crossing of their choice once the cad drawings have been done and chairs printed.

Hi My name is Graeme Lewis and I currently live in Brisbane, Australia. A friend introduced me to this website and it is certainly inspirational. My own interest is in 7mm scale and the Midland Railway, circa 1907. For a second generation Australian who grew up on the northern breaches of...

This is my next build for HMRS in Scale 7. As with the Kirtley Goods described here, Slaters MR/LMS Kirtley 0-6-0 Goods (Johnson) 7L007, there is less than no clearance between the splashers especially across the smaller section over the coupling rods. I have sent the O gauge wheels to...

A recently built model for a friends Midland Region layout. The arm is a MSE etch, and like wise the finial a MSE casting, the post is filed brass bar, and the landing is fabricated from angle and strip.