4mm Di-deitl TMD

[76043]

https://www.rmweb.co.uk/forums/topic/52540-castell-y-bwrdd/

Unfortunately the photos were lost from the web site and the thread is archived so I cannot put them back.

I will have a go at a layout thread here.

That would be great to see, especially a track plan to get an idea of what you did. We love a good set of photos on WT!
Cheers
Tony

 

[76043]

Track was finally stuck down with holes for the Seep motors drilled and brass screws used for the future baseboard joints.

 

[76043]

Got to fit signals and point rodding next before the ballasting and static grass fun can commence.

 

[76043]

Started work again on the depot building. Using Slaters siding material with more of the Peco depot parts and some plain plain plastikard. Taped the side to see what it looks like.



I decided the centre windows should be infilled as the centre RSJ is in the way, I thought that's what you'd do in this scenario.

 

[76043]

More work on the ground frame box has been underway. The retaining wall has a set of coping stones or bricks. The box has a removable roof for lighting and added drain pipes and guttering. The white lumps of styrene are pilings where the box gets sunk into the ground.



This is how it will all look with the boardwalk I found on a sprue from a used up Wills kit.

 

[76043]

Four out of six sides ain't bad. The depot build is continuing and using up the Peco parts nicely.