Grahame's N/2mm London Bridge train set

grahame

Western Thunderer
Here's a short update on a few things undertaken on the layout this weekend, although none are of any great consequence or dramatic effect. Not only did I need to order a single slip but I've also had to order a large radius curved right hand point. I've a few left hand ones but it's RH that is needed. That means no progress on the station throat trackwork.

However, I've effected a repair on the flat top tower crane and the New London Bridge House office block and I've fixed down the bridge over Boro High Street deck so it's smooth enough to continue to lay track to the west end return loops and fiddle-yard. I've also slightly adapted the crossover so that the left hand end is lightly curved to lead in to the angled platform lines.

And here's a pic taken today, just for the sake of it, of the through platforms.

2026-02-01-13.40.46 ZS PMaxcrrepred.jpg
 

Grahame Hedges

Western Thunderer
Damn. I'm going to have to put modelling on hold for a while. I got run over yesterday and spent most of the day in hospital. A car reversed in to me knocking me flying and hitting the asphalt hard. Ambulance and police were called and I was rushed to A&E. Luckily no bones broken but I'm now quite immobilised and in a lot of pain (knee, ribs, chest, elbow and shoulder) as well as a sling.
 

oldravendale

Western Thunderer
Grahame - that is really rotten for you. Hopefully the driver will be prosecuted for "due care and attention" but that doesn't help your situation and I'll guess that the driver was really upset about it. Deep down the vast majority of people are very decent.

Brian
 

Grahame Hedges

Western Thunderer
Great pics. The first view shows the whole of Battlebridge House (both sections built at different times) but shortly before demolition. It's lower left just above the platform canopies and left of Aston Webb house. Photos of Battlebridge House are rare. All the cleared land behind/right was developed as part of the More London regeneration project.
 

grahame

Western Thunderer
I'm recovering from the accident well, although I've still got bruising on my arm, cuts/scrapes on my knee and I'm in pain requiring regular codeine tabs.

This morning a new lens (Viltrox 20mm f2.8 FE) for my camera arrived. So a few quick test shots including one of the layout. Here it is just cropped and reduced in size (the original is over 20MB). I like the dramatic look from the wide angle of view. I need to use the focus bracket function on the camera for image stacking to improve depth of field which tends to be a requirement on miniatures photography:

DSC06593crred.jpg
 

grahame

Western Thunderer
I was hoping to get to the Ally Pally show today but there were no main line trains to London from either of my local stations and according to the website no valid return route. I didn't fancy spending 8 hours over the day on rail replacement buses and diverted trains so I bailed out. And instead took a few snaps of my layout, of which here's one;

2026-03-21-17.11.02 ZS PMaxpercrred.jpg
 

David B

Western Thunderer
Loving the 3H in that setting Grahame - I used to enjoy watching and hearing them (in blue and grey by then, working turn and turn about with 3Ds) thumping their way to and fro on the Central side. Is there any chance of some details on how you made it?
 

Grahame Hedges

Western Thunderer
Loving the 3H in that setting Grahame - I used to enjoy watching and hearing them (in blue and grey by then, working turn and turn about with 3Ds) thumping their way to and fro on the Central side. Is there any chance of some details on how you made it?

It's cobbled together from various bits; bodies are Farish MK1 coaches with BHE brass side overlays, cab ends from TPM, underframe details white metal castings from BHE and truss rods are etched ones from Ultima, roof details scratch built from wire etc, air horns from TPM, buffers from NBrass locos, motor chassis from bashed Farish class 158, bogie side frames from Farish.
 
Last edited:

David B

Western Thunderer
Wonderful modelling Grahame - you‘ve nailed the gritty, quirky, almost claustrophobic character of that part of London that I remember so well. Evening rush hour in the 1980s as watched from the eastern end of the Central Division platforms was a non-stop spectacle of operational precision, all relying on the iconic, ubiquitous and indestructible EE507 traction motors, plus the skill of the operators, platform staff and drivers. The old Southern Region was an amazing organisation. I can’t wait to see your lovely EMUs and DEMUs at work on the layout.
 
Top