Peter Cross
Western Thunderer
I managed a little work around the cab and bunker.
On the cab front I marked up and drill the vent holes just under the cab roof.
I did the same with the rear spectacle plate, but, also formed the shelf at the bottom of it.
The bunker front was then cut to height.
The bunker rear has also been cut to height, and had the flare bent on it.
The inner tanks were folded and soldered up.
I have made a start with some of the cab detail. I've marked out the two seat come tool boxes by the bunker, the cabinet for the rear spectacle plate, and the lower tank extensions. More on these next time I expect.
On the cab front I marked up and drill the vent holes just under the cab roof.
I did the same with the rear spectacle plate, but, also formed the shelf at the bottom of it.
The bunker front was then cut to height.
The bunker rear has also been cut to height, and had the flare bent on it.
The inner tanks were folded and soldered up.
I have made a start with some of the cab detail. I've marked out the two seat come tool boxes by the bunker, the cabinet for the rear spectacle plate, and the lower tank extensions. More on these next time I expect.