NHY 581
Western Thunderer
Evening all.
By way of an introduction, I shall post a few photos and an overview of one of my layouts.
Mutton is the only intermediate station on the Lamb Regis branch in Devon.
The branch was home to three Adams radial until they were displaced by the arrival of Ivatt 2.6.2t.
The overall size of the layout is 10ft with a scenic section of 4ft ( 120cm x 40cm). The base boards are all from IKEA and in the case of the scenic board, this is top from a TV table with the fiddle yards being two shelves.
Track is PECO code 75. Electrics are minimal with points actuated by 'pokey finger'
Buildings are detailed Bachmann Scenecraft with other detail such as lamps, loading gauge being scratch built..
Buffer stops are altered PECO with platforms using edging from the same source.
All stock is RTR. from either Bachmann or Hornby.
Still a few jobs to attend to but Mutton is just about there really.
By way of an introduction, I shall post a few photos and an overview of one of my layouts.
Mutton is the only intermediate station on the Lamb Regis branch in Devon.
The branch was home to three Adams radial until they were displaced by the arrival of Ivatt 2.6.2t.
The overall size of the layout is 10ft with a scenic section of 4ft ( 120cm x 40cm). The base boards are all from IKEA and in the case of the scenic board, this is top from a TV table with the fiddle yards being two shelves.
Track is PECO code 75. Electrics are minimal with points actuated by 'pokey finger'
Buildings are detailed Bachmann Scenecraft with other detail such as lamps, loading gauge being scratch built..
Buffer stops are altered PECO with platforms using edging from the same source.
All stock is RTR. from either Bachmann or Hornby.
Still a few jobs to attend to but Mutton is just about there really.
Last edited: