4mm West Halton Sidings - Signal Box

[James]

@steve50 I'm very pleased you found my article helpful

You don't need much paint to tint the varnish; just a drop in half a bottle top of thinned varnish is sufficient.

It works on BR blue too, experiment with the varnish and paint mix though. A very tiny bit of Matt Leather helps too. If you're painting the loco I'd consider mixing the BR blue with Rail Grey to create a faded base coat then follow the method as per the article.

 

[Suffolk Dave]

@steve50 I'm very pleased you found my article helpful

You don't need much paint to tint the varnish; just a drop in half a bottle top of thinned varnish is sufficient.

It works on BR blue too, experiment with the varnish and paint mix though. A very tiny bit of Matt Leather helps too. If you're painting the loco I'd consider mixing the BR blue with Rail Grey to create a faded base coat then follow the method as per the article.

This sound rather interesting. Could you let us know which MRJ your article is in? Thank you.

 

[AJC]

This sound rather interesting. Could you let us know which MRJ your article is in? Thank you.

Via the MRJ index, no. 287: Issue 287

Adam

 

[Suffolk Dave]

Via the MRJ index, no. 287: Issue 287

Adam

Many thanks - I'm now reading it!

 

[steve50]

@steve50 I'm very pleased you found my article helpful

You don't need much paint to tint the varnish; just a drop in half a bottle top of thinned varnish is sufficient.

It works on BR blue too, experiment with the varnish and paint mix though. A very tiny bit of Matt Leather helps too. If you're painting the loco I'd consider mixing the BR blue with Rail Grey to create a faded base coat then follow the method as per the article.

Thanks James.

 

[James]

A couple of coats of yellow on the Janus - the bonnets sprayed as they're removable and the rest hand painted.

 

[James]

A little bit of work on this over the last few days.



This is what is what I'm aiming for -

https://flic.kr/p/24cznH1

 

[James]

Just nerds windscreen wipers now.

 

[Dog Star]

The prototype photo shows some interesting distress to the number under the driver's cabside window.

 

[James]

37037, circa 1992. Finally finished!

 

[John57sharp]

Super-duper!

 

[Herb Garden]

View attachment 261991

37037, circa 1992. Finally finished!

View attachment 261993

View attachment 261996

That looks class!

 

[James]

37037 has been joined 37514 which I finished in a few years back (see MRJ 253) but have only just got round to chipping.

 

[James]

Something I've been working on over the last year as and when I've felt up to it is the signal box controlling the junction with the exchange sidings.



It has a shell of 60 thou Plastikard with framing from 20 thou and individually applied planks from 100 x 10 thou Evergreen strip.



Steps from York Model Making..



I initially made the roof from Plastikard but made a replacement from 10 thou brass.



I'm struggling with the windows.



I initially made windows using 10 thou square strip on 1mm Perspex using Plastic Weld. The method works well but I'm struggling with getting consistency between the different windows. My tremor's making placing the individual strips/pieces a bit of a challenge.

 

[ullypug]

When I did my signal box for Cheddar I got
York modelmaking to cut the windows from 0.5mm Rowmark and stuck them to 0.5mm Perspex with spray mount before trimming to size.