Latest activity
-
AJC replied to the thread 4mm An EM Workbench - rescuing the herd: three second hand cattle wagons.All the footplate irons on now, the offsets are odd, but prototypical. Again per the late Rice, I’ve opened out the injector detail... -
-
I fear you are correct, Peter, although I didn't want to mention it previously. Here are a couple of photos from my personal collection...
-
I did come up with a rising wheel chock (could be replaced with a simple pin to restrain an axle) which was a home-print mechanism for... -
Further progress has been made on the lining with the completion of the right hand side and the addition of the running number. I have... -
A small amount of lathework on a bevel gear, and a printed (PLA) motor mount, and the chassis does actually work (properly). You people...
-
Oh dear! One step forward and one step back. The Dave Bradwell cast sand box fillers, from his K1 kit, slightly modified, have been... -
Now we're on version three, or at least two and a half. When making the LH side rail, I'd marked the position where it passed through...
-
Yes, i had that on my computer for a while but never mastered it's use. Seems to have disappeared now. Anyway, I've had another go at...
-
Further progress has been made on the lining with the completion of the right hand side and the addition of the running number. I have...
-
Back on the Ivatt class 2 I've made a start on the lining. After doing the boiler bands and cylinders I moved on to the tank and cab...
-
With the warm dry weather in the last couple of weeks I've been able to get my painting head on and spray the Ivatt tank. Before...
-
To complete the work for now on the Ivatt, I've made the steam heating and vacuum pipes from brass rod. To represent the reinforced...
-
I think that Dave Sharp must have made a change to the etches for this kit while using a previous version to write the instructions. I...
-
-
Still working away on detailing the loco body, while awaiting the lubricators I decided to fit the handrails Oridinarily I would fit the...
