The Yard - A small industrial layout in 7mm

[Greengiant]

The fencing mounting and assembly jig became a handy drilling guide. I used brass rod in each end hole to keep it in position.


Fencing was primed with Halfords grey primer, then painted with Vallejo acrylics and weathered with MIG Oilbrushers.
I was pleased with how this came out and now made a start on a shorter section to go alongside the siding in front of the gantry crane.




Martin

 

[Greengiant]

I have now made and installed a shorter section in front of the crane. My intention is for this to look like the remnants of a fence cut away to gain access, the rest just left in place. I would like a much smaller section for the left hand end along with just a few individual posts and no wire. Unfortunately I have now run out of the mouldings, will have to take a look around at the Chatham show in a couple of weeks to see if a trader has some.

Pleased with how it has given some needed 'texture to the front of the layout. Very nearly there with what needs to be done on this layout and move on to other projects.




Martin