7mm On Heather's workbench - a trio of JLTRT Mk2s

ZiderHead

Western Thunderer
I'll be honest, when I saw the painted wood panel effect on the bench I wasnt convinced ... but seeing it installed with the roof on and viewed through the windows and corridoor ... it really works a treat :thumbs:
 

Colin M

Western Thunderer
Superb! :thumbs: I can't believe how quickly this has progressed.

It sets a standard for me to aspire to..!

Colin
 

Heather Kay

Western Thunderer
Thanks chaps!

The hold-up was getting the painting done. Once that was sorted out the coaches come together pretty quickly.

I'm about to have an evening session of more glazing on the second SO. The brasswork (door handles and stuff) will be done as a batch, rather than individually.

Nearly there. Best organise some delivery dates with Richard. :thumbs:
 

Heather Kay

Western Thunderer
The second SO is in the erecting shop.

IMG_5022.jpg

I started with the toilet and vestibule partition at each end. Then I assembled one body side and both gangway ends, held in place with Tamiya masking tape while the superglue went off. While the floor plate is held in place with double-sided tape, the seats and partitions are given extra assistance with superglue. I worked my way along one side, gluing a seat, then the table, seat, table, partition, seat, table and so on. Then I worked back along the open side of the coach.

IMG_5023.jpg

Here you can see all seats and tables in place, and we're ready to attach the remaining side.

IMG_5025.jpg

And within about half an hour, we have assembled the entire thing. The yellow tape is to hold the parts in place while the glue goes off.

I need to fix in the toilet window rails :oops:, then a spot of roof nut fishing, mounting on the bogies, and there will be two coaches in the same state of not-quite-finished-but-for-the-details. :thumbs:
 

Dog Star

Western Thunderer
Heather,
I have been looking at the photos of the interior of the end vestibules in regard to the coupling nut disguise. If the plate is necessary then the visual impact might be less to make the plate the size and shape of the vestibule - when looking through the door windows there is no "floor level reference" from the seating area and so the eye could be fooled into accepting the slightly higher floor in that area.
 
Last edited:

Heather Kay

Western Thunderer
If the plate is necessary then the visual impact might be less to make the plate the size and shape of the vestibule - when looking through the door windows there is no "floor level reference" from the seating area and so the eye could be fooled into accepting the slightly higher floor in that area.

Food for thought. In this case, though, I don't think you'll really see the plate at normal viewing distances.

I shall take the idea under review for any further builds. :)
 

Simon

Flying Squad
That looks just magnificent Heather, a great representation of what to my mind was the high point of post war passenger stock development.

I wouldn't be worrying about the plate on the floor, it just isn't going to be seen by any rational;) viewer.

Simon
 
Top